ARI Robotics

SPRUCE PICKERS

  • Simple swing adjustment between 50-90 degrees
  • Easy changeover between operator or non-operator side
  • Dual rail strip axis allows for fast and stable movement with low vibration
  • Linear vertical rails with Bosch Rexroth bearings ensure smooth operation
  • Sprue grip with unique pressure differential detection switch eliminates verification switch adjustment
  • Easy to read bright red LED’s for machine interface and position proximity switches eliminate troubleshooting guesswork
  • Locking cylinder prevents the main arm from drifting into the mold area in the event of pressurized air loss
  • Large shock absorber for arm descent
  • Pivoting base allows for easy mold changes

Large Servo Robots: MAXB 320-1600 Tons

  • Payload capacity from 22 – 66 pounds
  • Fixed full forward enclosed carriage strip axis frame suitable for machines with rear obstructions
  • Reliable rigid design coupled with flexible software suppressed vibration ensures maximum acceleration with minimum vibration
  • High precision linear guide system with hardened steel rails and Bosch Rexroth bearings
  • Patented fixed/moveable side movement
  • Release or grip inside the mold area – defective parts can be dropped inside or outside the mold area or on a conveyor
  • 2 vacuum 2 grip circuits standard
  • 4 spare input 4 spare outputs
  • Bright LED lights on all prox switches and vacuum sensors eliminate guesswork when troubleshooting
  • Telescoping vertical arm for low overhead ceiling clearance and faster cycle times
  • Lube system standard with programmable auto-lube option
  • Beam mounted control box saves valuable floor space

Small Servo Robots

  • 30 to 300 Ton Presses
  • 3 axis movement
  • Patented fixed/moveable side mount
  • Release or grip inside the mold area – defective parts can be dropped inside our outside the mold area or on a conveyor
  • 2 vacuum 2 grip circuits standard
  • Wrist rotate standard
  • Large easy to read LED lights on all prox switches and vacuum sensors eliminate guesswork when troubleshooting
  • Fully expandable I/O 8 inputs and 8 outputs standard
  • 2 vacuum and 2 pressure standard expandable up to 16 to meet almost any application need
  • Beam mounted control box saves valuable floor space
  • Power requirements 480 VAC 3 phase

Large Servo Robots: MaxC 470-3300 Tons

  • Reliable rigid design coupled with flexible software suppressed vibrations ensure maximum acceleration with minimum vibration
  • High precision linear guide system with hardened steel rails and Bosch Rexroth bearings
  • Moveable strip axis ensures removal of the tallest parts without obstruction
  • Heavy duty rack and pinion gear drive on all three axis
  • Patented fixed/moveable side movement
  • Release or grip inside the mold area-defective parts can be dropped inside or outside the mold area or on a conveyor
  • 2 vacuum 2 grip circuits standard
  • 4 spare input 4 spare outputs
  • Bright LED lights on all prox switches and vacuum sensors eliminate guesswork when troubleshooting
  • Telescoping vertical arm for low overhead ceiling clearance and faster cycle times
  • Lube system standard with programmable auto-lube option
  • Beam mounted control box saves valuable floor space

Please contact us directly with any of your questions or requests at (770) 427-3834.